Machining Partner - Quality Assurance !
At Low Cost Solution LLC responsibility for the quality of the parts and assemblies produced resides with the employees who make them. The technicians of inspection department play a supporting role in the manufacturing process by assuring all parts and assemblies are made according to established quality plans.

"Quality is never an accident; it is always the result of intelligent efforts"

	Aside from developing and implementing quality plans for every job that goes through our facility, Machining Partner's inspection team also supports the following activities:
	FAS (First Article Samples) ISIR (Initial Sample Inspection Reports) PPAP (Production Part Approval Process)
They also review all raw material certifications, thoroughly inspect and test outsourced parts and assemblies, conduct first-piece/final piece inspections when required, and maintain all manufacturing records.

a brake down
Machining Partner. takes the utmost care with the parts which are manufactured. When the material is received, it is checked to make sure it is the right size and the right type; then, the material is tagged. From this point, we set up the manufacturing outline which gives a detailed description of how the part will be fabricated.

After the first article is checked by the inspector, it cannot be bought off until his stamp appears in the designated place on the manufacturing outline. Each operator knows that he/she can't run the job until the previous operation is bought off. All operators are trained and equipped with special measuring devices with which they check the parts as they come off the machine. During this time, an hourly line check is also being performed by the floor inspector. Every step of the job is repeated in this way.

When the parts are completed, they are placed on a designated table for final inspection. From here, the parts are counted, checked and bought off. Parts are then shipped to the customer or outside processing.

To document quality control, the Coordinate Measuring Machine (CMM) produces a detailed printout of all dimensions of the part, which is available upon customer's request. Critical dimensions are designated as KEY dimensions and are charted as further means of control.

At Machining Partner, we believe that communication with our customers is a vital element in successful production, and we are constantly updating our quality control system as technological breakthroughs occur, in order to assure the utmost quality in our customers' parts for your satisfaction.